What to do right now
Turn the system off if you see water leaking inside, if you smell burning, or if the unit makes a loud grinding noise. Do not keep resetting a tripped unit. Note the fault code, the brand, and the room that has lost cooling or heating. Call 024 7722 0111 during operating hours, Monday to Friday 08:00 to 17:30, and speak to an engineer directly.
How a repair visit works
1. Call or WhatsApp
Call 024 7722 0111 or send a WhatsApp message to the same number. The engineer will ask for the brand, the fault code and the site address. Fast attendance is available for CV1 to CV6 addresses, city centre offices, the university estate, industrial parks and hospitality sites, and Ansty and Prologis parks.
2. Remote triage
We diagnose fault codes over the phone against the site asset register and dispatch the right refrigerant, parts and access equipment before the van leaves. Bring the asset list if you have one.
3. Scheduled attendance
In house engineers attend commercial sites across the Midlands and nationwide, with no subcontractors. Every engineer holds a personal F Gas certificate, so refrigerant work can be completed under the same visit. The engineer will test the system and explain the cause, fix and price before work starts.
4. Fix or safe hold
Where a full fix on the first visit is not possible we leave the plant in a safe, part operational state and issue a fixed price repair plan. The plan will state the part needed, the labour, the refrigerant if needed, and the return date. No work proceeds on the return visit without your approval of that price.
What we fix
| Fault | Likely cause in plain English | What AccuTemp does first |
|---|---|---|
| No cooling on a split, cassette or ducted unit | Low refrigerant charge, a failed sensor, a blocked filter, or a compressor that will not start | Remote triage on the fault code, then test pressures, sensors and airflow |
| No heating in winter | A reversing valve fault, a sensor fault, or low refrigerant charge | Check mode and fault code, then test the reversing valve and charge |
| Water leaking inside | A blocked condensate drain, a cracked tray, or a failed condensate pump | Isolate the unit, clear the drain, test the pump, and check tray and pipework |
| Unit trips and locks out | A compressor lockout, an inverter fault, or a PCB failure | Read the code against the asset register and bring the correct part |
| Warm air and weak airflow | A dirty coil, a blocked filter, or a fan failure | Check filter and coil, test fan and belt, and measure airflow |
| Chiller alarm and low charge lockout | A refrigerant leak or a sensor fault | Leak test the circuit, recover refrigerant where needed, and log the test |
| Controller blank or loss of BMS integration | A controller fault, a wiring fault, or an integration loss | Test the controller, check wiring and settings, and restore control |
We fix VRV and VRF fault codes for Daikin, Mitsubishi Electric, Fujitsu and Toshiba, plus splits, cassettes, ducted systems, chillers, AHU units and BMS controls.
What a repair call out costs
Repair call outs start from £180 plus VAT for the first hour on site, plus parts. That first hour covers attendance, diagnosis, and a fix where possible. If the fix needs a part, refrigerant or more labour, the engineer will give you a fixed price first. Maintenance contract clients receive discounted rates and priority parts from Daikin and Mitsubishi Electric stock.
Systems we repair whether or not we installed them
AccuTemp repairs commercial systems it did not install. We repair Daikin, Mitsubishi Electric, Fujitsu, Toshiba, LG, Samsung and Panasonic commercial systems. Bring the asset list and we will triage remotely before dispatching. An engineer who works across the main commercial brands can diagnose the whole site in one visit. We are commercial only, with no residential enquiries. Our engineers work on offices, retail, hospitality, healthcare, logistics and industrial sites.
F Gas and compliance during a repair
A repair that involves refrigerant is also a compliance event. Leak check, recovery and top up can all be completed under the same visit, with the leak test lodged to the F Gas record. Every engineer holds a personal F Gas certificate. If the leak test fails, we will explain the repair needed. A TM44 inspection is separate from a repair, and a repair visit is a good time to check whether yours is due.
Repair or replace
Repair is usually right when the fault is local and the part is available. Replace is usually right when the system is older, has frequent breakdowns, rising bills, uneven cooling, or rising repair costs. Ask for both prices where the choice is close, with the expected life of each option. AccuTemp installations are built to last 16 years on average, above the industry norm of 10 to 12 years.
How to prevent the next breakdown
Planned maintenance reduces the risk of a repeat breakdown. Maintenance from £100 plus VAT per visit for a single split system on contract, excluding parts and out of hours access. Contracts run for 6 month and 12 month terms. A visit covers filter cleaning, refrigerant checks, F Gas logging, electrical checks and detailed photo report. Keep the asset register up to date. Book a free site survey if you are unsure what your system needs.
Why AccuTemp
One of only two Daikin D1+ commercial contractors in Coventry and Warwickshire, delivering nationwide installs and managing TM44 inspections through our accredited partner network. That D1+ status brings priority parts access and extended warranties up to 7 years, backed by in house engineers and no subcontractors.
Call AccuTemp now
If your commercial air conditioning has broken down in Coventry, call 024 7722 0111 during operating hours, Monday to Friday 08:00 to 17:30, and speak to an engineer directly, or email sales@accutemp.co.uk. We aim to respond to enquiries within 24 hours.
AccuTemp Air Conditioning Ltd, founded 2013, headquartered at Justa House, 204 to 206 Holbrook Lane, Coventry CV6 4DD. Daikin D1+ Premium Partner, Mitsubishi Electric factory trained and accredited, Constructionline Gold, BESA member, ISO 9001 certified, F Gas registered, CHAS, SafeContractor and REFCOM registered. In house engineers, no subcontractors. Commercial only, no residential enquiries. Google reviews: 5.0 stars, 19 Google reviews.
